Type Definition lpc55_pac::usbphy::usb1_vbus_detect_set::R

type R = R<u32, USB1_VBUS_DETECT_SET>;

Reader of register USB1_VBUS_DETECT_SET

Implementations

impl R

pub fn vbusvalid_thresh(&self) -> VBUSVALID_THRESH_R

Bits 0:2 - Sets the threshold for the VBUSVALID comparator

pub fn vbus_override_en(&self) -> VBUS_OVERRIDE_EN_R

Bit 3 - VBUS detect signal override enable

pub fn sessend_override(&self) -> SESSEND_OVERRIDE_R

Bit 4 - Override value for SESSEND The bit field provides the value for USB1_VBUS_DET_STAT[0] if USB_VBUS_DETECT[3] is set to value 1'b1

pub fn bvalid_override(&self) -> BVALID_OVERRIDE_R

Bit 5 - Override value for B-Device Session Valid The bit field provides the value for USB1_VBUS_DET_STAT[1] if USB_VBUS_DETECT[3] is set to value 1'b1

pub fn avalid_override(&self) -> AVALID_OVERRIDE_R

Bit 6 - Override value for A-Device Session Valid The bit field provides the value for USB1_VBUS_DET_STAT[2] if USB_VBUS_DETECT[3] is set to value 1'b1

pub fn vbusvalid_override(&self) -> VBUSVALID_OVERRIDE_R

Bit 7 - Override value for VBUS_VALID signal sent to USB controller The bit field provides the value for VBUS_VALID reported to the USB controller if the value of USB1_VBUS_DETECT[3] is set to 1'b1

pub fn vbusvalid_sel(&self) -> VBUSVALID_SEL_R

Bit 8 - Selects the source of the VBUS_VALID signal reported to the USB controller This is one of the bit fields that selects the source of the VBUS_VALID signal reported to the USB controller

pub fn vbus_source_sel(&self) -> VBUS_SOURCE_SEL_R

Bits 9:10 - Selects the source of the VBUS_VALID signal reported to the USB controller This is one of the bit fields that selects the source of the VBUS_VALID signal reported to the USB controller

pub fn id_override_en(&self) -> ID_OVERRIDE_EN_R

Bit 11 - Enable ID override using the register field. This bit is only used if EXT_ID_OVERRIDE_EN = 1'b0.

pub fn id_override(&self) -> ID_OVERRIDE_R

Bit 12 - ID override value.

pub fn ext_id_override_en(&self) -> EXT_ID_OVERRIDE_EN_R

Bit 13 - Enable ID override using the pinmuxed value:

pub fn ext_vbus_override_en(&self) -> EXT_VBUS_OVERRIDE_EN_R

Bit 14 - Enable VBUS override using the pinmuxed value.

pub fn vbusvalid_to_sessvalid(&self) -> VBUSVALID_TO_SESSVALID_R

Bit 18 - Selects the comparator used for VBUS_VALID This bit field controls the comparator used to report the VBUS_VALID results in USB1_VBUS_DETECT[3] between the VBUS_VALID comparator and the Session Valid comparator

pub fn vbusvalid_5vdetect(&self) -> VBUSVALID_5VDETECT_R

Bit 19 - no description available

pub fn pwrup_cmps(&self) -> PWRUP_CMPS_R

Bits 20:22 - Enables the VBUS_VALID comparator: Powers up the comparator used for the VBUS_VALID detector

pub fn discharge_vbus(&self) -> DISCHARGE_VBUS_R

Bit 26 - Controls VBUS discharge resistor This bit field controls a nominal 22kohm resistor between the USB1_VBUS pin and ground