[−][src]Module lpc55_pac::usart0::cfg

USART Configuration register. Basic USART configuration settings that typically are not changed during operation.

Structs

AUTOADDR_W	Write proxy for field `AUTOADDR`
CLKPOL_W	Write proxy for field `CLKPOL`
CTSEN_W	Write proxy for field `CTSEN`
DATALEN_W	Write proxy for field `DATALEN`
ENABLE_W	Write proxy for field `ENABLE`
LINMODE_W	Write proxy for field `LINMODE`
LOOP_W	Write proxy for field `LOOP`
MODE32K_W	Write proxy for field `MODE32K`
OEPOL_W	Write proxy for field `OEPOL`
OESEL_W	Write proxy for field `OESEL`
OETA_W	Write proxy for field `OETA`
PARITYSEL_W	Write proxy for field `PARITYSEL`
RXPOL_W	Write proxy for field `RXPOL`
STOPLEN_W	Write proxy for field `STOPLEN`
SYNCEN_W	Write proxy for field `SYNCEN`
SYNCMST_W	Write proxy for field `SYNCMST`
TXPOL_W	Write proxy for field `TXPOL`

AUTOADDR_A	Automatic Address matching enable.
CLKPOL_A	Selects the clock polarity and sampling edge of received data in synchronous mode.
CTSEN_A	CTS Enable. Determines whether CTS is used for flow control. CTS can be from the input pin, or from the USART's own RTS if loopback mode is enabled.
DATALEN_A	Selects the data size for the USART.
ENABLE_A	USART Enable.
LINMODE_A	LIN break mode enable.
LOOP_A	Selects data loopback mode.
MODE32K_A	Selects standard or 32 kHz clocking mode.
OEPOL_A	Output Enable Polarity.
OESEL_A	Output Enable Select.
OETA_A	Output Enable Turnaround time enable for RS-485 operation.
PARITYSEL_A	Selects what type of parity is used by the USART.
RXPOL_A	Receive data polarity.
STOPLEN_A	Number of stop bits appended to transmitted data. Only a single stop bit is required for received data.
SYNCEN_A	Selects synchronous or asynchronous operation.
SYNCMST_A	Synchronous mode Master select.
TXPOL_A	Transmit data polarity.