[−][src]Module lpc55_pac::sct0::ev::ev_ctrl

SCT event control register 0

Structs

COMBMODE_W	Write proxy for field `COMBMODE`
DIRECTION_W	Write proxy for field `DIRECTION`
HEVENT_W	Write proxy for field `HEVENT`
IOCOND_W	Write proxy for field `IOCOND`
IOSEL_W	Write proxy for field `IOSEL`
MATCHMEM_W	Write proxy for field `MATCHMEM`
MATCHSEL_W	Write proxy for field `MATCHSEL`
OUTSEL_W	Write proxy for field `OUTSEL`
STATELD_W	Write proxy for field `STATELD`
STATEV_W	Write proxy for field `STATEV`

COMBMODE_A	Selects how the specified match and I/O condition are used and combined.
DIRECTION_A	Direction qualifier for event generation. This field only applies when the counters are operating in BIDIR mode. If BIDIR = 0, the SCT ignores this field. Value 0x3 is reserved.
HEVENT_A	Select L/H counter. Do not set this bit if UNIFY = 1.
IOCOND_A	Selects the I/O condition for event n. (The detection of edges on outputs lag the conditions that switch the outputs by one SCT clock). In order to guarantee proper edge/state detection, an input must have a minimum pulse width of at least one SCT clock period .
OUTSEL_A	Input/output select
STATELD_A	This bit controls how the STATEV value modifies the state selected by HEVENT when this event is the highest-numbered event occurring for that state.